TAGATORON MS Chassis Carbon Fiber Set Cover (5 types) [Bridge/Gear Retainer/Gear Reinforcement/Motor Holder/Battery Retainer]

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. ✅【Bridge】Effective in strengthening chassis rigidity. Installation requires modification of the chassis bottom. If you are considering battery drop modification, please purchase the separately sold jig "MS Holder TrimAssist". For chassis with battery drop modification, adjust the bridge height with washers, etc., according to tire diameter and your preferred battery height. ✅【Gear Retainer】Retains play in the counter gear during driving, stabilizing torque. ✅【Carbon Fiber for Gear Cover Reinforcement】Increases rigidity against chassis twisting. Requires modification of the original gear cover for installation. ✅【Motor Hold】Prevents the motor's A-part from loosening due to impacts during operation, suppressing torque loss. ✅【Battery holder】Lighter than the genuine part. ⚠️ Electricity will flow if the "bridging carbon" comes into contact with the battery terminals. Protect the contact area with an insulating material such as masking tape. ✅This product is not manufactured by Tamiya Corporation. It is a compatible product designed for casual prototyping and test runs. It cannot be used in official Mini 4WD competitions or races based on sanctioned competition rules. ✅For other competitions and races, please check the respective regulations and rules. Product Introduction ●【Bridge】Effective in strengthening chassis rigidity. Installation requires modification of the chassis bottom. If you are considering battery drop modification, please purchase the separately sold jig "MS Holder TrimAssist". For chassis with battery drop modification, adjust the bridge height with washers, etc., according to tire diameter and your preferred battery height. ●【Gear Retainer】Retains play in the counter gear during driving, stabilizing torque. ●【Carbon Fiber for Gear Cover Reinforcement】Increases rigidity against chassis twisting. Requires modification of the original gear cover for installation. ●【Motor Hold】Prevents the motor's A-part from loosening due to shocks during operation, suppressing torque loss. ● [Battery holder] Lighter than the genuine part. *Electrification occurs when the "bridging carbon" and the battery terminals come into contact. Please protect the contact area with an insulating material such as masking tape. ●This product is not manufactured by Tamiya Corporation. It is a compatible product designed for casual prototyping and test runs. It cannot be used in official Mini 4WD competitions or races based on sanctioned competition rules. ●For other competitions and races, please check the respective regulations and rules.