Automatic Water Level Controller Non Contact Pump Tank Filling System Sensor AC110V‑220V

Feature: 1. WORKING PRINCIPLE: When the liquid level of the container is too low, the low level alarm signal from the low level sensor is triggered to trigger the controller to close the relay to start the water pump to add the liquid level. When the liquid level reaches a certain height, the high level sensor sends a signal to trigger the controller to disconnect the relay and automatically stop the water pump. You can use the controller to fill or empty the tank 2. WIDE APPLICATION: Automatic water level controller relay has dry contact output, can be applied to a variety of loads 3. TWO MODES: Non contact water level controller supports control diversification and can control the pump in manual or automatic mode 4. WITH ACCESSORIES: The line length of the liquid level sensor is three meters, which can be applied to more scenarios. With enough accessories, convenient for you to install and use 5. INTELLIGENT CONTROL: The intelligent non contact level controller has the function of automatic control of the level of the container and can keep the level of the container stable Specification: Item Type: Automatic Water Level Controller Input Voltage: AC110V-220V, 50/60Hz Working Current: Working current ≤7A Power Consumption: ≤2W Sensor: Non contact liquid level sensor Load Power: When power supply voltage 110V, maximum power 800W When power supply voltage 220V, maximum power 1600W If you need to control the load beyond the limit parameter, please install an intermediate relay Alarm Output: 800W-1600W (resistive load) Output Mode: Normally open contact of relay Sensor Port Voltage: DC12V Ambient Temperature: -20℃ to 105℃, Relative Humidity: Less than 80% Mounting Method: Screw wall mounting Size: Approx. 115 x 115 x 40mm / 4.53 x 4.53 x 1.57in Line Length: Approx. 3meter / 9.8ft Package List: 1 x Level Sensor Controller 1 x Screwdriver 4 x Screw 3 x Cable Ties