Feature:
1. Compatible Protocols: Communication protocols use standard for Modbus TCP protocol, for Modbus RTU over TCP protocol, for MQTT protocol.
2. Input Performance: The module supports 8 channel digital input (DIN), 8 channel digital output (DO) and 8 channel analog input (AIN).
3. Protection Function: 1 way RS485 communication interface for expansion. Wide working voltage is DC9?36V, and with anti reverse connection protection function.
4. LED Indicator: Module with LED to indicate the working status, with reset button for reset, convenient for on site installation and commissioning.
5. Simple Maintenance: Data acquisition module can be managed and configured via LAN connection configuration software, easy to operate and maintain.
6. IP30 Protection: Metal housing and IP30 protection level, metal housing and system safety isolation, especially suitable for industrial control site applications.
Specification:
Item Type: Ethernet Remote IO ModuleMaterial: MetalInterface: Ethernet Port x 1, RS485 x 1, DIN x 1, AIN x 8, DO x 8
Power Output: DC x 1
Working Voltage: 9-36VDC
Analog Quantity: 4-20mAPlug Specification: AC100-240V
Power Supply:
Input Voltage:
Not Supported AO Output: 9-36VDC
Support AO Output: 24-36VDC
Power Consumption: Typical Standby Power Consumption: less than 2W
Power Output: Channel
Output Voltage: 9-36V DC (Equal To Input Voltage)
Output Current: 1500mA at.12V (Maximum)
Power Protection: Anti Reverse Connection, ESD Air: 15KV, Surge: 4KV
Ethernet: Network Port Specification 1 X RJ45, 10M/100Mbps
Network Interface Protection: ESD Contact: 8KV, Surge: 4KV (10/1000us)
Protocol: for Modbus RTU, for Modbus TCP, for MQTT
Serial Port:
Number Of Serial Ports: 1 X RS485
Serial Baud Rate: 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000
Data Bits: 7, 8
Check Bits: None, Eve, Odd
Stop Bit: 0.5, 1, 1.5, 2
Protocol for Modbus RTU (Slave), for Modbus RTU (Master)
Serial Port Protection: ESD Contact: 8KV Surge: 4KV (8/20us)
Digital Input:
Quantity: 8 Channels (Maximum)
Input Type: Supports Dry Contact and Wet Contact. The Default is Wet Contact. Dry Contact Needs to Be Described When Ordering;
Wet Contact Supports Both NPN and PNP Sensors
Dry Contact:
Closing: Short Circuit
Disconnection: Open End
Wet Contact:
Closed: 10-30VDC
Disconnection: 0-3VDC
Typical Applications:
Intelligent agricultural temperature and humidity data collection and monitoring;
Intelligent temperature and humidity data collection and monitoring of aquaculture;
Temperature and humidity data collection and monitoring in storage and library;
Data collection and monitoring of meteorological station information;
Temperature monitoring of cold storage, fruit and vegetable storage room, industrial machine room, transformer cabinet, etc;
Other occasions where monitoring points are scattered;
Data transmission of solar monitoring system, data acquisition and transmission of charging pile;
Data transmission of ATM, POS, electricity meter, PLC, DAQ and other equipment;
Smart grid data acquisition and control;
Intelligent traffic data acquisition and control;
Industrial automation data acquisition and control;
Environmental protection data acquisition and control.
Package List:
1 x Ethernet Data Acquisition Module1 x Rail Buckle3 x Screw1 x Power Adapter1 x User Manual Card
Rückerstattung bei Nichtlieferung
