Active Island Leathercraft Edge Treatment Tool for Line Drawing and a648 Ebony, Squeezing, (1.5mm)

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- For those who are particular about beautiful edge processing, we have the twisting tool, Tamaneji. Please enjoy this excellent product, which is made with great care from the material to the ease of use. A twist is a tool used in leather crafts to treat the edges of leather. It is pressed against a heated twist. This creates parallel lines on the edges, which not only looks beautiful, but also strengthens the fibers and increases durability by burning the leather. In addition, the stainless steel part is 4mm thick, so it has good heat retention and is easy to handle. First, heat the ball twister to the appropriate temperature using an alcohol lamp, melt the wax, and apply it to the edge. You can use wax for threading or edge wax. After that, heat the ball twister again and twist it. This is called decorative twisting, and the appearance changes depending on the skill level. *Using wax is also a personal preference. The size is determined by the width of the tip. Small sizes are suitable for thin leather, while large sizes are suitable for thick leather. We recommend choosing a size that is convenient for you based on the thickness of the leather you are using and the distance between the stitching and the edge. Since controlling the heat is difficult, it is a good idea to practice on a scrap of tanned leather. Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm Material: SUS304 stainless steel with excellent corrosion resistance. The handle is made of ebony, which has a jet black color and is dense, heavy, solid, and fits comfortably in your hand. Why not try the craftsmanship of a master craftsman? *For right-handed users Why not try pursuing the skills of a master craftsman? The world of edge processing is so deep that there is no end to the depths it can cover. The ball twist is heated with an alcohol lamp and applied with wax to the edge. It is used to add lines and increase the strength of the edge. As a result, the edges are lined and the piece is tightened. I can see it. Also, as it is called decorative twist, the edge is hardened by wax. It creates a glossy, rounded finish. Sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm Material: SUS304 stainless steel with excellent corrosion resistance. The handle is made of ebony and is characterized by its jet black color. It is dense, heavy, solid and fits comfortably in your hand. Please experience the craftsmanship of the artisans. Why not try it out? *Right-handed There is a groove at the end of the twist. If you hold it with the pointed end facing forward, it will The right edge is higher, so when you twist it, It's like you can draw a line. First, heat the ball to the appropriate temperature with an alcohol lamp, then Melt it and apply it to the edge. Wax for thread pulling or edge wax is fine. After that, the ball twister is heated again and twisted. It is called decorative twisting and its appearance changes depending on the skill level. It will be divided. *I also like to use wax. The size refers to the width of the tip. Smaller sizes are for thinner leather. The larger size is suitable for thicker leather. The thickness of the leather used and the distance between the stitching and the edge We recommend a size that is easy to use. Controlling the heat is difficult, so practice using scraps of tanned leather. I think that would be better. There is also an electric twister, so you can work at a constant temperature It is easy to create a unique piece, but the price and preference are important. This is the problem.