TONE Digital Torque 30Nm Ratchet, T2DT30H, 6.35mm (1/4") Drive, Black,

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. Insertion angle dr.A (mm): 6.35 Specification 1: Capacity range minimum to maximum (N・m) 6 to 30 / Minimum display (N・m) 0.3 ~ / Display digits (N・m) 0.01 / Display unit N・m / Number of teeth (pieces) 48 / Torque accuracy +-3% Specification 2: Operating temperature range: -10°C to 60°C / Storage temperature range: -20°C to 70°C / Humidity: 90% RH or less Specification 3: Battery: 2 x AAA batteries / Service life: Approximately 48 hours of continuous operation (with LED OFF), approximately 6 months in standby mode (with LED OFF) *Battery life may vary depending on usage and storage conditions. When the battery level is low, the power will automatically turn off. Specification 4: Tightening status notification function, pass/fail judgment function, data saving and transfer function, measurement mode switching function, left and right direction measurement support, calibration certificate included, sensor-equipped grip Dimensions: Total length 221mm, weight 0.36kg (excluding battery) Accessories: Communication software CD x 1, USB communication cable x 1, AAA batteries x 2, calibration certificate (with traceability system diagram) x 1, instruction manual x 1, resin case x 1 Expiration date of calibration certificate: If unused, it is valid for one year from the calibration date on the calibration certificate. If use began within one year from the calibration date on the calibration certificate, it is valid for one year from the start of use or up to 10,000 tightening cycles.