Fusion Splicer Kit Leather Cable Stripping Plier Cutter Heat Shrink Tubing Splicing Machine Set 100‑240V US Plug

Feature: 1. Basic Parameters: This black splicer has a fusion mode with a maximum of 128 groups, a core adjustment method for cladding alignment with loss estimation, and a heating time of 18 seconds. 2. Automatic Discharge Calibration: Our splicer has an automatic discharge calibration function, which can be automatically corrected according to changes in ambient temperature and air pressure. 3. Sturdy and Practical: This splicer is made of ABS material, superb craftsmanship, sturdy and practical, and can be suitable for a long term under the correct operation. 4. Simple Operation: The optical fiber splicer is lightweight and portable, with fast splicing speed, simple operation. 5. Security in Usage: Enhances security in usage, can withstand greater work strength, improves performance, allows for an enhanced experience in usage. Specification: Item Type: Fiber Optic Fusion Splicer Material: ABS Color: Black Core Adjustment: Cladding Alignment Applicable Fiber Type: SM(ITU T G.652 and G.657), MM(ITU T G.651), DS(ITU T G.653), NZDS(ITU T G.655) Fiber Type: 0.25 3.0 mm or Leather Cable Fiber Clamp: Replaceable Universal Clamp, SOC Clamp Cladding Diameter: 80 150micrometer‌, Coating Diameter: 100 1000micrometer‌ Cutting Length: 8 16 mm Fusing Mode: Maximum 128 groups Fusing loss: SM: 0.03dB MM: 0.01dB DS: 0.04dB NZDS: 0.04dB G.657: 0.03dB Return Loss: >>60dB Fusing Time: 8 seconds (SM G652 Quick mode) Loss Estimation: Yes Heating Time: 18 seconds (SM G652 250micrometer‌ 40mm heat shrinkable tube in Quick mode) User adjustable Applicable Heat Shrink Length: Approx. 20mm 0.8in, 30mm 1.2in, 40mm 1.6in, 50mm 2.0in, 60mm 2.4in Heating Mode: Maximum 32 groups Battery: With built in battery x 1, matching battery x 1 (with matching battery) Capacity: 5200mAh, each charge supports about 300 times fusion and heating (single battery capacity) Electrode Life: about 5000 times discharge Automatic Start: Fusing or heating Automatic Discharge Calibration: Automatic calibration according to ambient temperature and air pressure changes Result Storage: 10,000 sets of fusion welding data or 2,000 sets of fusion welding images Tensile Force Test: 1.96 2.25N Operating Conditions: 0 5,000m above sea level Relative Humidity: 0 95percent , 20 50 degrees C Maximum Wind Speed: 15m s Storage Conditions: Relative Humidity 0 95percent , 20 60 degrees C Temperature Display: 3.5 inch HD LCD display Magnification and Display: X, Y, XY, X Y, 20x magnification Port: USB2.0 . Package List: 1 x Fusion Splicer1 x Fiber Optic Cutter Set(Fiber Optic Cutter, 1pc Hex Wrench, Storage Case)1 x Leather Cable Stripping Plier1 x Fiber Optic Stripping Plier1 x Alcohol Bottle1 x Li Battery100 x Heat Shrink Tubing1 x Electrode Rod1 x Charger1 x AC Adapter1 x Cleaning Sheet1 x Back Strap1 x Instruction Manual1 x Carrying Storage Box Note: 1. Using standard optical fibers, the results obtained from the test according to the standard cutoff methods of ITU T and IEC, the loss will be changed by the environment and the characteristics of the fiber.2. The results obtained from measurements at room temperature are largely influenced by the state of use of the cell and the operating environment.3. The life of the electrode rod may vary depending on the environment, fiber type and fusion mode.