OPEL z200 (L200 / 200) "Schwarz" Car Paint Spray 400ml Black

OPEL Z 200

• Capacity: 400 ml

• Base: acrylic resin

• Yield for a 400 ml can: from 1.25-1.75 m2

• Non-adhesive: from 5 to 10 minutes

• Drying time: from 10 to 20 minutes

• Hard/ready to cover: after approx. 2 hours

• high temperature resistance: up to 110 degrees Celsius

Drying time depends on, among other things, the ambient temperature, air humidity and the density of the varnish used.

1. The surface must be thoroughly cleaned and degreased. Fill gaps, scratches, and irregularities with putty, then smooth the repaired surface with 400-grit dry sandpaper. Remember to protect adjacent elements, preferably with masking tape and foil. Then apply several thin layers of primer.

2. Leave the areapainted with primer to dry (up to approximately 2 hours at 20 degrees Celsius). Then smooth using 800-grit sandpaper, and this time wet.

3. The repaired element should be cleaned and degreased again. Please remember to leave a few minutes between applying subsequent layers.

4. About 30 minutes after applying the last layer of basecoat, apply several layers of clearcoat to the repaired area. Finally, we can remove the masking elements. After 24 hours and complete drying, the surface is ready for polishing.

• Base Coat

NAME: SCHWARZ