YNAK Tent Tarp Fly Sheet Repair and Strong Seam Instructions Included 25mm Wide X 20m Maintenance, Waterproofing, Tape, Iron-on, (Black, Long)

Iron-on PVC and polyurethane seam tape, black. Fuse to PVC and polyurethane-coated fabrics. Width 25mm x Length 20m, Approx. 78g. Japanese instruction manual. Suitable for tents, tarps, fly sheets, etc. The tape fabric is thick, making it suitable for stiff fabrics such as tents and tarps. It can be used to prevent and repair leaks from seams. Clean the fabric, place a pressing cloth over it, and iron on a dry setting at medium-low heat (approximately 10-20 seconds). If you apply the iron directly to the fabric, the heat may melt the fabric. You can use a handkerchief or similar item as a pressing cloth. After heat pressing, the bond will strengthen as it cools. If you round the corners of the tape, it will be harder to peel off. 🔴It cannot be applied to water-repellent tent surfaces or fabrics coated with water-repellent agents such as silicone. Seam tape itself is somewhat waterproof, but rather than using the tape's own waterproofing to prevent water from entering, it is primarily used as a waterproofing measure to seal and reinforce the seams between the fabrics being repaired to prevent water from entering.