Compatible voltage: AC220V or less
Current rating: 15A
Compatible pressure: 175PSI, 12Bar, 0.8MPa shutoff, 0.6MPa start
Port mounting thread size: 1/4" 2-minute, outer diameter approximately 14mm
Exhaust pipe mounting size: 6mm diameter
Flip the side switch to ON and raise it to OFF.
Instruction manual not included.
- Please confirm whether your switch is a 4-port or 1-port.
- A switch with a safety valve, pressure gauge, regulator, etc. connected to it is a 4-port.
- If a 1-port switch is installed on a 4-port compressor, regulators, etc. cannot be installed.
- A branch joint is required for installation.
- As long as the number of ports, port size, and exhaust pipe connection size are appropriate, you can choose from a variety of switch styles, including pull, side, and rotary.
If air still sprays from the release valve on the side of the switch even when the compressor is shut off, the check valve at the end of the exhaust pipe may be faulty. Please check this.
◇◆ Compressor Pressure Switch, Side Switch Type, 0.8 MPa, 4 Ports, with Sealing Tape ◆◇
*:--☆--:*:--☆--:*:--☆--:*:--☆--:*:--☆--:*:--☆--:*
Compatible Voltage: AC 220V or Less
Current Capacity: 15A
Compatible Pressure: 175 PSI, 12 Bar
0.8 MPa: Shutdown
0.6 MPa: Startup
Port Mounting Thread Size: 1/4" 2-minute, Outer Diameter Approximately 14mm
Exhaust Pipe Mounting Size: 6mm Diameter
Please confirm whether your switch is a 4-port or 1-port. Switches with a safety valve, pressure gauge, regulator, etc. connected to them are 4-port.
If air is still spraying out from the release valve on the switch side even when the unit is stopped, please check as this may be due to a fault in the check valve at the end of the exhaust pipe.
